7104 Lock ~ Our best selling Unican Lock

Application

The 7000 Series lockset provides fully mechanical primary or auxiliary pushbutton access control with no electrical wiring, electronics, or batteries. Exterioraccess is by combination. Egress is by interior thumbturn and is free at all times.

The 7104 Deadlocking latch models automatically relock each time the door closes.
7000 Series locksets are suitable for residential or light commercial applications. The streamlined housing with integrated pull makes the lock ideal for front and rear doors, garages, conference rooms, offices, garden cabanas, utility rooms and workshops. Mounts above existing lockset, or can be used alone.

The pushbutton design eliminates problems associated with the issue, control, and collection of keys and magnetic cards. The combination can be quickly and easily changed to ensure continued maximum security once employees, tenants, or guests leave, saving the cost of new keys, key cylinders, magnetic cards, and card-encoding devices. The combination is changed without
removing the lock from the door.

Features
One hand operation: Depress the buttons in the correct sequence, then turn the thumbturn to retract the deadlocking latch. Thousands of possible combinations:
Authorized individuals can change the combination in seconds. One or all five buttons can be used in the combination - individually or with two or more buttons depressed simultaneously.

Easy to install on wood or metal doors:Easily retrofits primary or auxiliary lock installations. Exterior trim plate covers existing 21⁄8” (54mm) bores.

Rugged & weather resistant: The lock is wear-tested for intensive use. Suitable for indoor or outdoor locations.

Includes: Strike for in-swing and out-swing doors (appropriate to latch type), strike box, installation instructions, full-scale template.

Specifications
Construction: All metal; cast front housing; force-proof clutch-protected thumbturn; exterior brass trim plate;
Door thickness: 13⁄8” (35 mm) to 21⁄4” (57 mm)
Strikes:
Models 7004 and 7014: curved lip strike plate

Installation: 13⁄8” (35 mm) diameter through bore for housing; 1” (25 mm) diameter cross bore for latch; 3⁄4” (19mm) through bore for
combination change sleeve; 2 x 1⁄4" mounting bolts, 4” (102 mm) minimum stile required.
Door handing: Field reversible
Control: Standard Phillips screwdriver to change combination from the inside
of the door (not included).

Finishes: Satin Chrome or Polished Brass